Git Add Exam:
echo "# Device Configs Linh Trung" > README.md
git add .
git commit -m "Initial commit"
git push -u origin master
Create Git local:
git init
git add README.md
git add .
git commit -m "first commit"
git remote add origin https://github.com/userName/repoName.git
git push --force origin master echo "# services" >> README.md
git init
git add README.md
git commit -m "first commit"
git branch -M main
git remote add origin https://github.com/databom/services.git
git push -u origin main 
| First Do this ... | |
| git fetch origin master | |
| git merge master | |
| Then, do this ... | |
| git fetch origin master:tmp | |
| git rebase tmp | |
| git push origin HEAD:master | |
| git branch -D tmp | |
| Now everything works well. |
git fetch origin master:tmp
git rebase tmp
git push origin HEAD:master
git branch -D tmpError: Message 'src refspec master does not match any' when pushing commits in Gitgit init
git add .
git commit -m 'message'
git *create remote
git push -u origin master
OR
git checkout -b master
git add .
git commit -m "my commit message"
git push origin master
Ásbrú Connection Manager like PAC
https://www.asbru-cm.net/
6200(config)# snmp-server vrf default
6200(config)# snmp-server vrf mgmt
6200(config)# snmp-server system-contact netadmin@hcmus.edu.vn
6200(config)# snmp-server system-description Aruba-6200-NDH
6200(config)# snmp-server system-location Aruba-6200-NDH
6200(config)# snmp-server community CSLT@hcmus
6200(config-community)# access-level ro
deny-local-routing
no…
This command disables routing traffic between two clients of an IAP on different VLANs. Routing traffic between the clients will be sent to the upstream device to make the forwarding decision.
Use this command to prevent the local routing of traffic if you have security and traffic management policies defined for upstream devices.
The following command disables local routing:
(Instant Access Point)(config)# deny-local-routing
(Instant Access Point)(config)# end
(Instant Access Point)# commit apply
https://www.arubanetworks.com/techdocs/Instant_40_Mobile/Advanced/Content/CLI_commands/deny-local-routing.htm
Restricting access to an Aruba switch GUI and CMD via VLAN router IP
Exam:
- Allow all 10.29.3.0/24 , 10.29.4.0/24, 10.29.5.0/24
- Allow all icmp
- Deny all
access-list ip quantriswitch
20 permit any 10.29.5.0/255.255.255.0 any
21 permit any 10.29.4.0/255.255.255.0 any
22 permit tcp 10.29.3.0/255.255.255.0 any
23 permit icmp any any
90 deny any any any
apply access-list ip quantriswitch control-plane vrf default
https://community.arubanetworks.com/discussion/cx6000-restricting-access-to-management-ip-of-switch
- Instal Printer Driver HP on arch linux:
sudo pacman -S cups
systemctl enable cups && systemctl start cups
sudo pacman -S system-config-printer
sudo pacman -S hplip-plugin
yay -S hpuld
- Config Printer
sudo hp-setup -i <IP Printer>
- Install scanner:
sudo pacman -S sane
yay -S xsane
- Config print pdf file to printer
lpadmin -p <Printer_name> -o pdftops-renderer-default=pdftops
- Printer manager over web:
https://localhost:631
user/pass is on system
How to recursively chmod all directories Or files
To recursively give directories read&execute privileges:
find /path/to/base/dir -type d -exec chmod 755 {} +
To recursively give files read privileges:
find /path/to/base/dir -type f -exec chmod 644 {} +
Or, if there are many objects to process:
chmod 755 $(find /path/to/base/dir -type d)
chmod 644 $(find /path/to/base/dir -type f)
Note these recipes may not work correctly if you have whitespace in your input [also true of the xargs examples below].
Or, to reduce chmod spawning:
find /path/to/base/dir -type d -print0 | xargs -0 chmod 755
find /path/to/base/dir -type f -print0 | xargs -0 chmod 644
Sometimes, when you are executing a file transfer between your computer hard drive and an external drive and your computer shutdown for some reason (in my case, no battery/ac power) it’s pretty common to get some errors on external drives that uses NTFS as they file system.
The most common message is:
Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0).
Failed to mount ‘/dev/sdb3’: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it’s a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the ‘dmraid’ documentation
for more details.
One workaround for this issue is to do as the message says, boot on Windows and try to use the awesome NTFS tool that Windows offer. But a perfect solution for a Linux users is to use the ntfsprogs utility.
UPDATE: On some recent Linux releases, you need to install ntfs-3g utilties. Try sudo apt-get install ntfs-3g or download from http://www.tuxera.com/community/ntfs-3g-download/
ntfsprogs is a suite of NTFS utilities based around a shared library. The tools are available for free and come with full source code.
- mkntfs: Create an NTFS volume on a partition
- ntfscat: Print a file on the standard output
- ntfsclone: Efficiently backup/restore a volume at the sector level
- ntfscluster: Given a cluster, or sector, find the file
- ntfsfix: Forces Windows to check NTFS at boot time
- ntfsinfo: Dump a file’s attributes, completely
- ntfslabel: Display or set a volume’s label
- ntfslib: Move all the common code into a shared library
- ntfsls: List directory contents
- ntfsresize: Resize an NTFS volume
- ntfsundelete: Find files that have been deleted and recover them
- ntfswipe: Write zeros over the unused parts of the disk
- ntfsdefrag: Defragment files, directories and the MFT
- ntfsck: Perform consistancy checks on a volume
- nttools: Command-line tools to view/change an offline NTFS volume, e.g. ntfscp, ntfsgrep, ntfstouch, ntfsrm, ntfsrmdir, ntfsmkdir
- ntfsdiskedit: Walk the tree of NTFS ondisk structures (and alter them)
Be careful with these utilities, they might damage the filesystem, or your hard disk !
With ntfsprogs installed (sudo apt-get install ntfsprogs) you should execute the following commands in a terminal:
sudo ntfsfix /dev/partitionName
After this command you should expect the following output:
~$ sudo ntfsfix /dev/sdb3
Mounting volume... FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... FAILED
Correcting differences in $MFTMirr record 0...OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb3 was processed successfully.
After this step you should be able to access your external drive partition as usual, mount or use nautilus to access your files.
Source: http://gnuwin32.sourceforge.net/packages/ntfsprogs.htm
https://wmarkito.wordpress.com/2010/12/29/how-to-fix-mftmirr-does-not-match-mft-record-0/